Left click on a depth value in the list, or a depth line on the diagram, to select it. The relative spacing of the passes is indicated in the diagram next to the list. The Pass Depths section at the top of the form shows a list of the current pass depths. See the section on the Tool Database for more information on this.Ĭlicking the Edit button opens the Edit Tool form which allows the cutting parameters for the selected tool to be modified, without changing the master information in the database. ToolĬlicking the Select button opens the Tool Database from which the required tool can be selected. The depth of the toolpath relative to the Start Depth. If machining into the bottom of an existing pocket or stepped region, the depth of the pocket / step must be entered. When cutting directly into the surface of a job the Start Depth will usually be 0. Specifies the depth at which the pocket toolpath is calculated.
These toolpaths automatically compensate for the tool geometry - both diameter and angle. This option opens the Pocket Toolpath form for machining 2D pockets.
